ANGLE BAR

ANGLE BAR

Angle bar is a profile produced by hot rolling or cold bending.

Exmet OÜ offers angles from stock as follows:

20 × 20 – 200 × 200

Mark: S235, S355 (corresponding to the European Union standard EN10025)

Standard length: 6,000 mm and 12,000 mm

S275JR+M – structural steel (yield strength of 275 MPa minimum) with an impact toughness of at least 27 J at 0 °C, with the M symbol indicating that it is thermomechanically rolled;

S235JR+AR – structural steel (yield strength of 235 MPa minimum) with an impact toughness of at least 27 J at 20 °C (JR), with the AR symbol indicating that the profile is released without rolling;

S355J2+N – structural steel (yield strength of 355 MPa minimum) with an impact strength of at least 27 J at –20 °C (J2), with the N symbol indicating that the steel profile is in a normalised state or has been rolled with normalisation.

CUT-TO-SIZE PRODUCTS

If you do not find a suitable selection in stock, please contact us to order cut-to-size products.